SU-600 Universal Programmer
Flash Universal Programmer
The best solution for programming high-density Flash memory on the R&D and small production stage
Introduction
SU-600 Universal Programmer is a newly-designed programmer for the high-density NAND / NOR / SPI Flash and Microcontroller / MCU / MCP. It provides the highest speed and stability for R&D and small production. Furthermore, for the special application of NAND Flash, it provides complete Bad Block Management during programming, verifying, the master reading, and device analysis function. NAND Flash, Nor Flash, Microcontroller, MCU, MCP are all covered.
In addition, SU-600 Universal Programmer supports flexible multi-programming system. It means you can connect 4+ units SU-600 Gang Universal Programmer on the same PC for 4+ sites programming. SU-600 Universal Programmer is the best selection for programming the new generation diverse Flash devices.
Features
- Supports NAND Flash analysis function, able to find the bad block location and the relative size.
- Ultra high programming speed: 32M bits/sec.
- Supports NAND Flash Bad Block Management.
- Intelligent NAND Flash master reading, you can customized Bad Block Managing Settings.
- Auto-detect function for wrong insertion and bad connection of pins.
- USB high speed interface, able to connect 4 units SU-600 on the same PC for 4 site programming.
- Independent socket circuit design which increases the programming stability.
- Stand-alone industrial LED start button. The Pass, Fail and Work LEDs clearly show the programming situation.
- Provides device data used map analysis function. You can easily know the whole device data mapping.
- Provides mass production oriented software, included project operation, programming quantity control and yield statistics.
Specification
- User RAM：64 MBytes
- Button/Switch：START LED / ID Setting
- User Interface：Power LED, Work / Pass / Fail LEDs on each site
- Communication：USB 2.0
- Power：90V AC ~ 260V AC (Auto-Switching)
- Frequency Range：47/63Hz
- Power Consumption：24W(Max)
- Dimension：11.6cm x 24cm x 6cm (Socket and START Key are not included)
- Weight：1.5Kg
- Operating Altitude：up to 5000m
- Operating Humidity：20%~70% (non-condensing)
- Temperature：+5℃ ~ +45℃
File Type Supported
- Binary, Intel HEX, Tek HEX, Motorola HEX, ASCII HEX, etc.
PC System Requirement
- Operating System：Windows 10 / 8 / 7 / Vista / XP ( 32bits & 64bits )
- CPU：Pentium 4 and above
- Memory：1GB~2GB RAM and above
- Hard Disk：500M Byte and above
- Communication：USB2.0
Standard Accessories
- Main unit x 1
- CD x 1 (Driver and user manual are included)
- USB cable x 1
- AC power cord x 1
- Adaptor screw x 18
Optional Accessories
- TSOP, TSSOP, BGA, uBGA, VSOP, SOP, SSOP, PLCC, etc.
