Static Charge Eliminator HAUG Ion-Air One IR1 Low Pressure Static Blow Off
The HAUG air ionization blower Ion-Air mini is a small, lightweight unit which is operated at a voltage of 24VDC. The Ion-Air mini is supplied with a clamp which allows the unit to be fixed very easily in the desired position, for example at a table edge. When the clamp is removed, the Ion-Air mini can be used a handy table-top unit
Principle
A high-voltage source integrated into the unit with fine metal pins produces positive and negative ions. A blower generates an air stream enriched with these ions which is used to neutralize electrostatic charges.
Characteristics and Advantages
- easy to clean
- small dimensions and low weight
- flexible use: as table-top or clip-on unit
- 24 VDC operating voltage
- integrated microcomputer for fault analysis
- steplessly adjustable fan
- low noise
- display for cleaning intervals
- fault signalling output
Applications
The Ion-Air Mini can be used in the following areas, among
- photo and film processing
- electronic production
- precision engineering
- optical engineering
- plastics processing
- module assembly
- pad printing
- feeding and sorting technology
Accessories
included in supply
- connection cable to external voltage supply (length 1.5 m)
- set of 2 fault signalling cables (length 1.5 m each)
- grounding cable (length 1.8 m)
- clamp
- Screw driver for setting the fan speed
Accessories
| Wide-range plug-in power supply unit | Order-No.: X-7539 |
Technical Data Ion-Air Mini
| Types | Ion-Air mini | Order-No.: 04.0353.000 | |
| with integrated discharging pins and microcomputer for fault analysis. | |||
| Dimensions (H x W) | 128 x 73 x 74 mm (H x W x D) | ||
| Supply voltage | 24 VDC ±5% | ||
| Power input | 350 mA (at highest fan speed) | ||
| Operating temperature | ±0 °C to +40 °C | ||
| Storage/transport temperature | -20 °C to +60 °C | ||
| Ambient humidity | 20% to 80% room humidity | ||
| Weight | 300 g (without clamp) | ||
Subject to technical changes!
Technical Data Plug-In Power Supply Unit
| Supply voltage | 100 VAC – 240 VAC (50 – 60 Hz / 0,4 A) |
| Output voltage | 24 VDC / 0,65 A |
| Grounding cable length | 1,8 m |
| Mains cable length | 1,5 m |
| Weight | 130 g |
HAUG Static Control Products And Solutions For Industry