TULA.VN - Electronics Materials and Instruments in Vietnam  
       TIẾNG VIỆT     
Home | Line Card | Letter | Site Map | Contact Us
            
DEVICE PROGRAMMER | INSTRUMENTS | MATERIALS | COMPONENTS | SERVICE ABOUT US | FAQ
 PDODUCTS
Device Programmers
»
Universal Programmer
»
Gang Programmer ¦
»
In-System Programmer
»
Specialized Programmer
»
Auto. Handler System
»
Sockets and Accessories
»
Eprom Eraser, IC Tester
»
HDD/memory Duplicator
»
Jig test ICT/FCT/DIP-pallet
Test and Measurement
»
Osciloscope, HDS, MSO
»
Spectrum/Network/Logic
»
Data Logger and Sensors
»
Digital Multimeter
»
Generator, Freq. couter
»
LCR, component tester
»
Power Supply, elec. load
Design, Assembly Tools
»
Training & Education KIT
»
Embedded Dept. Tools
»
Rework & Solder tools
»
SMT/ PCBA Equipments
Other electronics Tools
»
Automotive Tools
»
Telecom, Television
»
Optical, Force, Torque
Electronics components
»
MCU 8051-core series
»
Nuvoton ARM Cortex-M
»
Voice and Audio ICs
»
Nuvoton ARM7/9 Soc
»
Wireless RF IC, Tools
 Số lượt truy cập
We received

237198411
page views since 20/12/2006
 Ai đang online
There are currently, 0 guest(s) and 0 member(s) that are online.

You are Anonymous user. You can register for free by clicking here



OUR PARTNERS
(Products Line-Card)



Flash Support Group

PEmicro

Power Supply

Shenzhen KESD Technology Co.,Ltd.



Car and Consumer IC Solutions Provider


  

Category: Main/3. Electronics Equipments & Systems for embedded electronics design and PCB assembly/3.3. Solder Tools and rework systems


      
  Máy đo nhiệt độ Hakko FG-100: Tester/Thermometer
  Part#: HAKKO FG-100
  Ghi chú: Máy đo nhiệt độ
  Nhãn hiệu: HAKKO (Nhật Bản/Japan)
  [ Tài liệu Datasheet ]   [ Quotation Quotation sheet ]   [ Shopping Shopping now ]   [ Views: 7014 ]   2021-01-09
 ◊ Đặc điểm chính:
  • LEAD FREE   RoHS
  • Automatic measurement to standardize the process
  • Automatic temperature measurement
  • Measurement counter can be useful for control of changing sensor.
  • Long life sensor AS5000 (with certificate of conformance) is equipped as standard
  • Đo lường tự động để chuẩn hóa quy trình
  • Đo nhiệt độ tự động
  • Bộ đếm đo lường có thể hữu ích để kiểm soát việc thay đổi cảm biến.
  • Được trang bịc ảm biến tuổi thọ cao AS5000 (với chứng chỉ phù hợp) 

 ◊ Mô tả chi tiết:

Features

Automatic temperature measurement:AUTO HOLD Function

The measurement will end automatically when tip temperature is stabilized.
The measurement process will be the same no matter who does it.

Constant display of measured max. temperature:MAX HOLD Function

Max measured tip temperature will be displayed.
This function can be useful for quality control of components and P.W.B.

Temperature Sending Function

Measurement result by AUTO HOLD function or MAX HOLD function can be sent to a soldering station (FN-1010) through infrared.
This function can eliminate manual process of recording results, the time for the process, and human error.

* Image photo below
AUTO HOLD function and MAX HOLD function cannot be used at the same time.

FG-100B機能

Temperature Measurement Count Function

Number of tip temperature measurement will be automatically counted.
This function can be useful for control of changing sensor.

Auto Shutoff Function

The power will automatically be shut off after 3 minutes of no use.
It can save battery power and time for changing battery.

Fine sensor can deliver accurate measurements.

Suitable for Lead-Free Solder

・Disposable sensor always maintains accurate temperature measurment
(Replace sensor when the measuring point underwent degradation)

Accessible from any direction

・Allows you to measure from any desired direction according to tip shape

Dimensional Measurement
* Design image only

Several ways of measurement can be possible with temperature probes. (Option)

はんだ槽内のはんだの温度を測定

For soldering pot
No.A1310


Usage/Applications

 Initial display (room temperature) appearing when the power is turned ON

It is not necessary to deduct the room temperature that was displayed when the power was turned ON from the measured temprature. The temperature appearing on the LED display is the actual measured value.



 Guaranteed temperature range with the measurement tolerance of ±3°C

In general, the optimal temperature range for soldering is 300°C to 500°C, and that for SMD rework system is 300°C to 600°C. The tolerance of ±3°C within the optimal temperature range (300°C to 600°C) is assured. For the temperature range other than the above, the tolerance is not guaranteed but usually stays in the range of about ±5°C.

Packing List
HAKKO FG-100B セット内容

Packing List

Model No.Packing List 
FG-100BHAKKO FG-100B セット内容Unit, 006P 9 V dry battery (for trial), Sensor (qty 10 ), Instruction manual

仕様

Model No.FG-100BPower supplyTemperature resolutionTemperature measurement rangeTemperature precisionTemperature sensorDisplayOperating environmentEnvironmental conditionsDimensionsWeight
006P 9V dry battery (alkaline cell recommended)
1ºC
0 to 700ºC
±3ºC (300 to 600ºC)
±5ºC (other than above)
K (CA)type thermocouple
LCD : 3 1/2 digits
Ambient temperature/Humidity range : 0 to 40ºC, max.80% RH (without condensation)
Applicable rated pollution degree 2 (According to IEC/UL 61010-1)
75(W)×44(H)×140(D) mm
125g

* Dimensions : excluding protrusions
* Weight (excluding battery)
* Temperature sensor can only be used ti measure temperatures below 500ºC. To measure higher temperatures, use an applicable temperature probe.

表示内容

Replacement Parts

 Part No.NameSpecifications
photo:AS5000AS5000Sensorlead-free w/cert conformance
 Change-out rate of sensor
The sensor replacement period is about 50 times per single sensor in general, but this changes depending on the temperature used and the components in the solder and flux.
If you use lead-free solder, the sensor needs to be replaced more frequently.
If the sensor degrades because it is being eaten away by the solder, it will register a low temperature. Even if the sensor is not broken, replace it after about 50 measurements.

Even if the soldering tip has degraded, the temperature will register extremely low. Keep these points in mind and decide on the sensor replacement period.
Caution: The sensor is extremely thin and may break if pushed with force.

Option

 Part No.NameSpecifications
photo:A1310A1310Temperature probefor soldering bath & pot
photo:C1541C1541Temperature probehot air
photo:A1556A1556Sensor A 
photo:A1557A1557Sensor B 
Several ways of measurement can be possible with temperature probes.
For soldering pot No.A1310
For hot air station No.C1541
For soldering pot
No.A1310
For hot air station
No.C1541
 
temperature probes A1310
A1310
How to use the temperature probe for hot air station.




 Thêm chi tiết:

Chắc chắn và dễ dàng Kiểm soát nhiệt độ
Thích hợp cho hàn không chì
· Đáp ứng nhiệt độ tốt bằng cách sử dụng cảm biến dây CA tốt (φ0,2mm)
· Cảm biến dùng một lần luôn duy trì phép đo nhiệt độ chính xác
(Thay thế cảm biến khi điểm đo bị suy giảm)
· Cảm biến có tuổi thọ gấp đôi so với cảm biến thông thường.
Đo kích thước
· Cho phép bạn đo từ bất kỳ hướng nào mong muốn theo hình dạng đầu

 Measuring Sample of Thermometer HAKKO FG-100 *Chỉ hình ảnh thiết kế
Chức năng tự động tắt
· Nếu không có thao tác đo nào được thực hiện trong vòng 3 phút, nguồn sẽ tự động ngắt.
Chức năng MAX HOLD
· Khi nhấn nút "MAX HOLD", "MAX HOLD" sẽ được hiển thị và nhiệt độ cao nhất của Bàn là sẽ được giữ trên màn hình.
 Display Sample of MAX HOLD Function
Nhiệt độ dễ đọc
· Màn hình lớn và rõ ràng
· Hiển thị nhiệt độ kỹ thuật số giúp đọc chính xác
Kích thước nhỏ gọn
· Thuận tiện để mang theo và tiết kiệm không gian làm việc của bạn

Usage/Applications


 Màn hình ban đầu (nhiệt độ phòng) xuất hiện khi BẬT nguồn

Không cần thiết phải trừ nhiệt độ phòng được hiển thị khi BẬT nguồn với nhiệt độ đo được. Nhiệt độ xuất hiện trên màn hình LED là giá trị đo thực tế.


 Phạm vi nhiệt độ đảm bảo với dung sai đo ± 3 ° C

Nói chung, phạm vi nhiệt độ tối ưu cho hàn là 300 ° C đến 500 ° C và cho hệ thống làm lại SMD là 300 ° C đến 600 ° C. Đảm bảo dung sai ± 3 ° C trong phạm vi nhiệt độ tối ưu (300 ° C đến 600 ° C). Đối với phạm vi nhiệt độ khác với quy định trên, dung sai không được đảm bảo nhưng thường nằm trong khoảng ± 5 ° C.

Packing List

Part No.Packing List
FG100Main body FG-100, 006P 9V Manganese dry battery, Instruction manual, Sensor (10 pcs/set) 191-212
*Pin đang dùng thử dựa trên dấu hiệu của danh sách đóng gói.

HAKKO FG-100 should be calibrated regularly as a Tester / Meter.
For details, please contact us or the distributors in your country.

仕様

Model No.

FG-100

Power supply

006P 9V dry battery (alkaline cell recommended)

Temperature resolution

1ºC

Temperature measurement range

0 to 700ºC

Temperature precision

±3ºC (300 to 600ºC)
±5ºC (other than above)

Temperature sensor

K (CA)type thermocouple

Display

LCD : 3 1/2digits
Besides measured temperatures,display indications include the following:
- Battery low alarm
- Burnout alarm
- MAX HOLD : 'MAX HOLD' is displayed at the lower right of the LCD.

Operating environment

Ambient temperature/humidity range : 0 to 40ºC, 20 to 90%RH (without condensation)

Environmental conditions

Applicable rated pollution degree 2 (According to IEC/UL 61010-1)

Dimensions

68(W)×140(H)×38(D) mm

Weight

115g

* Kích thước: không bao gồm phần nhô ra
* Trọng lượng (không bao gồm pin)
* Khi báo pin yếu xuất hiện, hãy đảm bảo thay pin. Nếu không làm như vậy sẽ dẫn đến việc đo nhiệt độ không chính xác.

Ví dụ về màn hình HAKKO FG-100
Display
Video:




CÁC SẢN PHẨM KHÁC CÙNG NHÀ SẢN XUẤT / OTHER PRODUCTS FROM HAKKO
FX-888D: Hakko sondering station
Hakko 393-1: Vacuum pick-up tool - bút chân không nhặt chip
1.000.000đ
FR-810B: SMD Rework System
13.900.000đ
FA-400(220V): Desktop solder smoke absorber
2.000.000đ
Máy hút khói HAKKO FA-430: Smoke absorber/Air purifying type
Máy đo nhiệt độ Hakko FG-100: Tester/Thermometer
Trạm hàn sửa mạch Hakko FM-206: Soldering Station/Rework Systerm
FX-951 (220V): Máy hàn Hakko - Soldering Station
Tay hàn HAKKO FM-2027; 2028: Iron Soldering Handle
Máy hút khói HAKKO 494 (220V): Smoke absorber/Line-production system
Dây lấy thiếc hàn HAKKO WICK: Desoldering wire



Thao tác người sử dụng: [ Add Download ]

 





CONDITTION AND USING TERMS

TULA Solution Co., Ltd - Công ty TNHH Giải pháp TULA
Headquater: No. 173 Group 15, Dong Anh District, Hanoi 10000, Vietnam
Head-Office: No. 6 Lane 23, Đình Thôn street, Mỹ Đình ward, Nam Từ Liêm Dist., Hà Nội, Vietnam
Tel.: +84-24.39655633,  Hotline: +84-912612693,  E-mail: info (at) tula.vn

 
Copyright © 2005-2023, TULA Solution Co., Ltd. All right reservedABOUT US | FAQ