NovaSelect Series is an economical, compact selective solder system providing the convenience and flexibility of single point, drag, and mini-wave soldering. Ideal for low volume/high mix through hole soldering requirements, the system includes: Spray Fluxer, Bottom-side Preheat, and Lead/Lead Free Solder Pot, and is Nitrogen ready. Options include Topside Preheat, along with a wide assortment of nozzles.
Prototyping - Product Development - Short Run, High Mix Applications
- System includes: Spray Fluxer, Bottom-side Preheat & Lead/Lead Free Solder Pot with Nozzle.
- Through-hole soldering flexibility - single point, drag, mini-wave, or dip soldering.
System Features
- Easy to use Windows based operating software
- Programming with Gerber Import
- Windows Laptop Included
- Topside Pre-Heat Option
- Witness Camera Option
- Wide Nozzle Assortment
- Nitrogen Ready (Nitrogen supplied by customer)
- Ease of Operation, small footprint, & durable construction
Options
- Nitrogen Generator System
- Witness Camera Option
- Topside Pre-heat Option
- Custom Nozzles
- Custom Board Pallets
- Optional Stand
Max board size:
|
330mm x 330mm
(13" x 13")
|
Min. Neighbor Component Clearance:
|
1.5-3mm
(0.06"-0.12") depending on nozzle size
|
Preheater:
|
|
Solder Capacity:
|
Approximately 15
lbs.
|
Pressure (Nitrogen):
|
2 bar (30 psi)
|
Flux System:
|
Micro Spray
|
Solder Pot and Pump:
|
|
Warm up Time:
|
30 minutes
|
Max Temperature:
|
320°C (608°F)
|
Consumption (Nitrogen):
|
0.8-1.7 CFM
(23-49 liters/min) dependent on nozzle
|
Air Pressure:
|
5.5 bar (80 psi)
|