Features
- iDRC CP-268 Series multi-range power meter Watt resolution up to 0.01mW at 150V/300V range
-
Multi ranges to be best solution for component test.
- 9 Voltage ranges from 1.5V, 3V, 6V ~ 600V;
- 15 current with a powerful internal sensor measurement function, all the current ranges from 1mA, 2mA, 5mA ~ 50A(CP-268-5),connected in single terminal, without switching terminals or addition external sensors (45 ~ 65Hz).
- 135 watt ranges .(CP-268-5), widely measurement range from “standby power” to 30kW, meet the requirement of ENERGY STAR.
- Proper for low capacity rectification load, the accuracy will not deviate even when PF=0.1
- True RMS voltage, current measure, auto/manual range.
- Frequency resolution 0.001Hz.
- All digitized type.
- Close case calibration, no adjust, soft calibration, high stability, long interval between two calibrations.
- iDRC CP-268 Series multi-range power meter seven measure parameter: V, A, W, PF, VA, VAR, Hz
- Bi-directional active power measurement
- Peak current over range indication.
- Current phase lead or lag indication
- 4 screens display , 4 test values at same time, all function refresh rate is 5 times/sec.
- Last panel set memory.
- Build-in RS-485 interface, baud rate up to 115K bps
- GPIB SCPI compatible (optional)
- CE approved